HeFei Vinncom Science And Technology Co.,LTD
Vinncom! Welcome! Victory in communication
Add to Cart
100 Watts 3.8GHZ 4GHZ 6GHZ N Male Low PIM -163dbc -165dbc RF Load Termination
Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop some port in the RF system, pay attention to the power handling , otherwise may be over-heated .
Vinncom will supply dummy loads in different power for different frequency range, it can be up to 67GHz .
For some RF system , it will need good PIM value, vinncom can supply -130dbc,-140dbc and -165dbc PIM .
| Part Number | VN-LD-4G-100W-ONm-S-160 |
| Operating Frequency (GHz ) | 0-4 |
| Impedance ( Ohm ) | 50 |
| VSWR | ≤1.30 (≤1.2 @ DC-3.8G) |
| IM3 (dBc @ 2×43dBm) | -160 |
| Application | Indoor & Outdoor |
| Degree of Protection | IP65 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Interface | N Male |
| Handling Power (Watt, max) | 100 |
| Dimension (mm)(L×W×H, excl connector) | 180X150X62 |
| Net Weight (g) | 1865 ± 20 |
| Packing Dimensions (mm,L×W×H) | 305 × 170 × 115 |
| Packing Carton Size (mm,L×W×H) | 620 × 360 × 180 |
| ROHS Compliance | Yes |
| Revision | R1 |
| Date | 12-Oct -2020 |
